Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Gunji, Satoshi; Araki, Shohei; Watanabe, Tomoaki; Fernex, F.*; Leclaire, N.*; Bardelay, A.*; Suyama, Kenya
Proceedings of 12th International Conference on Nuclear Criticality Safety (ICNC2023) (Internet), 9 Pages, 2023/10
Institut de radioprotection et de s
ret
nuclaire (IRSN) and Japan Atomic Energy Agency (JAEA) have a long-standing partnership in the field of criticality safety. In this collaboration, IRSN and JAEA are planning a joint experiment using the new STACY critical assembly, modified by JAEA. In order to compare the codes (MVP3, MORET6, etc.) and nuclear data (JENDL and JEFF) used by both institutes in the planning of the STACY experiment, benchmark calculations of the Apparatus B and TCA, which are critical assemblies once owned by both institutes, benchmarks from the ICSBEP handbook and the computational model of the new STACY were performed. Including the new STACY calculation model, the calculations include several different neutron moderation conditions and critical water heights. There were slight systematic differences in the calculation results, which may have originated from the processing and/or format of the nuclear data libraries. However, it was found that the calculated results, including the new codes and the new nuclear data, are in good agreement with the experimental values. Therefore, there are no issues to use them for the design of experiments for the new STACY. Furthermore, the impact of the new TSL data included in JENDL-5 on the effective multiplication factor was investigated. Experimental validation for them will be completed by critical experiments of the new STACY by both institutes.
Tada, Kenichi; Yamamoto, Akio*; Kunieda, Satoshi; Konno, Chikara; Kondo, Ryoichi; Endo, Tomohiro*; Chiba, Go*; Ono, Michitaka*; Tojo, Masayuki*
Journal of Nuclear Science and Technology, 10 Pages, 2023/00
Times Cited Count：0 Percentile：0.01(Nuclear Science & Technology)Nuclear data processing code is important to connect evaluated nuclear data libraries and radiation transport codes. The nuclear data processing code FRENDY version 1 was released in 2019 to generate ACE formatted cross section files with simple input data. After we released FRENDY version 1, many functions were developed, e.g., neutron multi-group cross section generation, explicit consideration of the resonance interference effect among different nuclides in a material, consideration of the resonance upscattering, ACE file perturbation, and modification of ENDF-6 formatted file. FRENDY version 2 was released including these new functions. It generates GENDF and MATXS formatted neutron multi-group cross section files from an ACE formatted cross section file or an evaluated nuclear data file. This paper explains the features of the new functions implemented in FRENDY version 2 and the verification of the neutron multigroup cross section generation function of this code.
Iwamoto, Osamu
JAEA-Conf 2020-001, p.11 - 16, 2020/12
Iwamoto, Osamu; Iwamoto, Nobuyuki; Shibata, Keiichi; Ichihara, Akira; Kunieda, Satoshi; Minato, Futoshi; Nakayama, Shinsuke
EPJ Web of Conferences, 239, p.09002_1 - 09002_6, 2020/09
Times Cited Count：46 Percentile：99.95(Nuclear Science & Technology)Fleming, M.*; Chadwick, M.*; Brown, D.*; Capote, R.*; Ge, Z.*; Herman, M.*; Ignatyuk, A.*; Ivanova, T.*; Iwamoto, Osamu; Koning, A.*; et al.
EPJ Web of Conferences, 239, p.15003_1 - 15003_5, 2020/09
Times Cited Count：4 Percentile：95.3(Nuclear Science & Technology)Tada, Kenichi; Iwamoto, Osamu
Proceedings of 2019 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC 2019), Vol.2, p.1622 - 1624, 2020/08
Times Cited Count：0 Percentile：0.08(Nuclear Science & Technology)JAEA has published the evaluated nuclear data library JENDL to improve the prediction accuracy of nuclear calculations. JENDL is now one of the most famous evaluated nuclear data libraries in the world. This presentation explains the recent activity of the JENDL project and overview of the next version of general-purpose file JENDL-5. Nuclear calculation codes cannot treat the evaluated nuclear data library. This presentation also explains the nuclear data processing system FRENDY which is used to generate cross section library for a nuclear calculation code.
Kondo, Ryoichi*; Endo, Tomohiro*; Yamamoto, Akio*; Tada, Kenichi
Proceedings of International Conference on Mathematics and Computational Methods applied to Nuclear Science and Engineering (M&C 2019) (CD-ROM), p.1493 - 1502, 2019/00
A perturbation capability of ACE formatted cross section files was developed using the modules of FRENDY. Uncertainty quantification using MCNP was carried out for the Godiva critical experiment by the RS method. We verified the results of the RS method by comparing with those obtained by the conventional sensitivity analyses. Moreover, uncertainty reduction using the bias factor method with the RS technique was applied to kinetic parameter, i.e., neutron generation time.
Iwamoto, Osamu
JAEA-Conf 2018-001, p.87 - 91, 2018/12
Status and plan of JENDL will be presented. After the release of JENDL-4.0 in 2010, six special purpose files have been developed. Four of them were already released and two are under preparation for the release. New decay and yield data for fission products were released as JENDL/FPD-2011 and JENDL/FPY-2011 in 2011, respectively. JENDL-4.0/HE released in 2015 includes proton and neutron induced reaction data up to 200 MeV. Comprehensive decay data were released as JENDL/DDF-2015 which contains data for 3,237 nuclides. New photonuclear reaction data JENDL/PD-2016 and an activation file JENDL/AD-2017 are under preparation for release. Regarding general purpose file, two activities are in progress. One is JENL-4.0u which is created for maintenance of JENDL-4.0 and the other is development of next version of JENDL. For the next JENDL, evaluation for light nuclei and structure material are in progress. It is planed that next version of JENDL will be JENDL-5 which contains nuclear data for all nuclei having natural abundance. Addition of covariance data will be one of the main targets.
Hashimoto, Shintaro; Sato, Tatsuhiko; Iwamoto, Yosuke; Ogawa, Tatsuhiko; Furuta, Takuya; Abe, Shinichiro; Niita, Koji*
Kaku Deta Nyusu (Internet), (120), p.26 - 34, 2018/06
Particle and heavy-ion transport code system PHITS has been used for calculations of radiation shielding in accelerator facilities. PHITS describes physical phenomena induced by radiation as combination of transport and collision processes. The collision process including nuclear reactions is simulated by the three-step calculation: a generation of a reaction, pre-equilibrium, and compound processes. In the simulation, many physics models are used. This report explains roles of the models in PHITS and shows their developments we recently performed.
Suyama, Kenya; Yokoyama, Kenji
Kaku Deta Nyusu (Internet), (119), p.38 - 47, 2018/02
We have developed numerous neutronics calculation codes in Japan. However, development of the one-point burnup calculation code which replaces the still widely used ORIGEN2 code has not been successful. The one point burnup code is indispensable to evaluate the characteristics of the used nuclear fuel increasing in Japan, and it uses all evaluated nuclear data including the fission yield and decay data as well as cross section data. It means that it could be the Killer Application in the field of the nuclear data and neutronics code. This report describes the necessity of the one point burnup calculation code development in Japan and required function and performance which have been considered by authors.
Iwamoto, Osamu; Shibata, Keiichi; Iwamoto, Nobuyuki; Kunieda, Satoshi; Minato, Futoshi; Ichihara, Akira; Nakayama, Shinsuke
EPJ Web of Conferences, 146, p.02005_1 - 02005_6, 2017/09
Times Cited Count：1 Percentile：61.21(Nuclear Science & Technology)Suyama, Kenya
Kaku Deta Nyusu (Internet), (117), p.5 - 14, 2017/06
The benchmark calculation is one of the main activities of the Nuclear Science Committee under the Nuclear Energy Agency of the Organization for Economic Cooperation and Development (OECD/NEA/NSC). The international benchmark relatively frequently means the benchmark activity carried out by the NEA. In this manuscript, the author discusses the significance of the international benchmark by describing (i) the current status of the benchmark in the field of the reactor physics conducted by the OECD/NEA/NSC, (ii) revision of the neutronics calculation code system to reflect the results of the benchmark, (iii) the benchmark calculation as the asset for the future research and development, (iv) examples of the benchmark calculation based on the experimental data, and (v) how to propose the benchmark in the OECD/NEA/NSC.
Goto, Minoru
JAEA-Review 2014-058, 103 Pages, 2015/03
JAEA-Review-2014-058.pdf:22.36MB
The following issues were investigated using experimental data of HTTR, which is a Japan's HTGR with 30 MW thermal power. (1)Applicability of nuclear data libraries to nuclear analysis for HTGR, (2) Applicability of the improved nuclear analysis method for HTGR, (3) Effectiveness of a rod-type burnable poison on HTGR reactivity control. Using these investigation results, a nuclear design of a small-sized HTGR with 50 MW thermal power (HTR50S) was performed. In the nuclear design of HTR50S, we challenged to decrease the number of the fuel enrichments and to increase the power density compared with HTTR. As a result, the nuclear design was completed successfully by reducing the number of the fuel enrichment to only three from twelve of HTTR and increasing the power density by 1.4 times of HTTR.
Japanese Nuclear Data Committee
Nihon Genshiryoku Gakkai-Shi, 44(1), p.106 - 114, 2002/01
no abstracts in English
Katakura, Junichi; Yoshida, Tadashi*; Oyamatsu, Kazuhiro*; Tachibana, Takahiro*
JAERI 1343, 79 Pages, 2001/07
no abstracts in English
*; Takemura, Morio*
JNC TJ9440 2000-005, 157 Pages, 2000/03
With use of the two-dimensional discrete ordinates code DORT and the standard groupwise shielding design library JSSTDL produced from the latest evaluated nuclear data library JENDL-3.2, experimental analyses for the representative configurations in the Radial Shield Attenuation Experiment of the JASPER were performed. The results were compared with those obtained with use of traditional method DOT3.5/JSDJ2 for the previous JASPER experimetal analyses. In general, the change of the cross section library gives higher results and the change of the transport code gives lower results. Finally the new analysis method gives better agreement with the experimental results and also less deviations of calculational errors between various detectors. Experimental analyses for the thick concrete configulation in the Gap Streaming Experiment of the JASPER was also performed with the new analysis method, after solving the poor agreement found in last year with the original JASPER experimental analyses. The same tendency due to the library change was confirmed with the above mentioned analyses of the Radial Shield Attenuation Experiment. Compilation of the input data necessary for future reanalyses of important configurations in JASPER experiments were continued through the above-mentioned experimental analyses and related informations were added for repletion of the database preserved in a computer disk holding previously accumulated data. Input data descriptions were made for auxiliary routines needed for the experimental analyses and their sample data were compiled and stored in the database.
*
JNC TJ9400 2000-007, 46 Pages, 2000/03
JNC-TJ9400-2000-007.pdf:2.16MB
For fission cross section and prompt fission neutron spectrum, which largely influence core characteristics of a fast reactor, we have performed experimental and analytical studies for developing an advanced technique to measure absolute fission cross section and neutron fission spectrum for actinide nuclides such as Np237. As the results, we could develop an advanced technique, which combines a normalization technique for the well-known differential cross section and a correction method by a Monte-Carlo code for sample effects. This advanced technique accurately provides both absolute fission cross section and prompt fission neutron spectrum individually. By employing this technique, in this study, we have measured for three actinides (
Np, 
Th and 
U), then, have obtained the fission cross sections and fission spectrum parameter data for those nuclides. Furthermore, we have also performed an analytical study to examine sensitivity of fission spectrum parameter to core multiplication factor by using the standard calculation code for a first reactor.
*
JNC TJ9400 2000-005, 182 Pages, 2000/03
JNC-TJ9400-2000-005.pdf:4.74MB
The SLAROM code, performing fast reactor cell calculation based on a deterministic methodology, has been revised by adding the universal module PEACO of generating Ultra-fine group neutron spectra. The revised SLAROM, then, was utilized for evaluating reaction rate distributions in ZPPR-13A simulated by a 2-dim RZ homogeneous model, although actually ZPPR-13A composed of radial heterogereous cells. The reaction rate distributions of ZPPR-13A were also calculated by the code MVP, that is a continuous energy Monte Carlo calculation code based on a probabilistic methodology. By coparing both results, it was concluded that the module PEACO has excellent capability for evaluating highly accurate effective cross sections. Also it was proved that the use of a new fine group cross section library set (next generation set), reflecting behavior of cross sections of structural materials, such as Fe and O, in the fast neutron energy region, is indispensable for attaining a better agreement within 1% between both calculation methods. Also, for production of a next generation set of group cross sections, the code NJOY97.V107 was added to the group cross section production system and both front and end processing parts were prepared. This system was utilized to produce the new 70 group JFS-3 library using the evaluated nuclear data library JENDL-3.2. Furthermore, to confirm the capability of this new group cross section production system, the above new JFS-3 library was applied to core performance analysis of ZPPR-9 core with a 2-dim RZ homogeneous model and analysis of heterogeneous cells of ZPPR-9 core by using the deterministic method. Also the analysis using the code MVP was performed. Bycoaparison of both results the following conclusion has been derived; the deterministic method, with the PEACO module for resonance cross sections, contributes to improve accuracy of predicting reaction rate distributions and Na void reactivity in fast reactor cores. And it ...
